Hefei Wind Wing Energy Technology Co., Ltd.  

Product Name: MPPT Wind Turbine Controller Model NO.: WWS(200W. -600W) Rated Voltage: 12V Application: Lighting Controller, Wind Controller Model: Wws(200W,-600W) Trademark: Windwing Transport Package: Carton Box Specification: CE Origin: China HS Code: 85030030 Product Description 1-1 Basic informationSuper-intelligent wind/solar hybrid controller is a new type of special high performance control device for new energy application which is designed on the basis of ultra high performance controller. It contains many years of application experience (such as waterproof, dustproof, salt spray, wiring error, wind resistance limit control of Wind turbines, energy management etc.), it has done to ultimate no matter it applied to the charging control or street light control. In order to meet variety of applications, the controller adopts a hierarchical and modular structure, all functions can be achieved with different functional plates according to actual application, and it is convenient for rapid customization and application.1-2 CharacteristicsWaterproof Three defenses for circuit board, hierarchical design, even if small amount water enters, it will not damage the deviceRS232 communicationStandard configuration RS232 communication, it is easy to do the monitoring with the computer software. (RS485, short-range wireless is optional). Using a USB to RS232 members, more convenient to exchange data with a computer (computer with USB interface can be used).Safety wire connectingTerminals are treated with injection molding process, wiring short circuit and cross will not occur, more safety for customers' operating.Automatically alarming of battery reverseBattery input terminal will not be damaged with continuous reverse, and it has buzzer alarm. Avoid equipment damage and fire caused by wiring errors, and better protect the battery.Automatically alarming of Photovoltaic panels reversePhotovoltaic panels will not be damaged with continuous reverse, and it has buzzer alarm. It will not cause wiring errors especially when work at night. (Note: reverse connection detection in the nightneeds manuallykeys intervention)Continuous short-circuitoutput protectionDischarge output terminal has continuous short-circuit protection, and over current protection. It is recovered after the abnormal excluded. Avoid damage of the controller or fire caused by electrical equipment fault (especially the short circuit).Patented Wind turbines steady speed generation control technologyPatented Wind turbines steady speed generation control method, which makes the Wind turbines not run with super speed, the Wind turbines can keep generation with a limited set speed even in the high winds, avoid direct stop of Wind turbines with over speed caused by strong wind. Greatly improve the Wind turbines generation energy and keep the safe running of the Wind turbines.Patented Wind turbines stall current limit control technologyPatented Wind turbines stall current limit control methods, which makes Wind turbines not run over current, avoid the damage of expensive generator caused by heating due to over current.Wind turbines input MPPT generation technology (boost)Controller can provide automatically Wind turbines input maximum powertracking mode, or the 5 segments matchcurveinput configurationmode(input rev to input current; or output voltage to input current curve), which makes the high efficient generation of the Wind turbines, but with low speed.Support multiple output mode selectionThis controller provides optional multiple output modes (light control, time control, light on in the morning, PWM dimming, reverse direction), which can satisfy a variety of applications.Statistics the cumulative generating capacity, remaining power, speed, current, temperature and other dataThe controller screen displays not only the current, voltage, power of conventional Wind turbines, PV, battery, and the output terminal; but also the cumulative generating capacity of Wind turbines and PV, the remaining battery power, Wind turbines speed, unloading current, and the temperature of controller.Alarm function when terminals up When the terminals are up, the controller will alarm, which requires customers to use with the correct install direction, avoid the possibility of damage caused by water comes into the controller when used in the open air or due to bad weather.Product ParameterModel WWS06-24VDCWWS06-48VDCBattery parametersApplied battery voltage24V48VBattery protect methodReverse connection protection (do not burn any components, with voice prompt); over voltage protection, under voltage protection (for street light and such kind of load) Voltage at the over voltage protection point29.0V±0.2V58.0V±0.3VVoltage at the over voltage recovery point27.5V±0.2V55.0V±0.3VVoltage at the under voltage protection point21.0V±0.2V42.0V±0.3VVoltage at the under voltage recovery point23.0V±0.2V46.0V±0.3VBattery temperature compensation5mv/ºC/2V (settable) (optional component)Wind turbines input parametersRated power of applied Wind turbines600W/24V600W/48VRated power of the terminal30A dc (after rectification)15A dc (after rectification)Max. input current of the terminal40A dc (after rectification) 20A dc (after rectification) The default speed of the Wind turbines generation with limited speed500 Rpm (settable)The default current of the Wind turbines generation with limited current30A (settable)15A (settable)Wind turbines protection methodover rev protection, over current protection, induction lightening protectionUnloading methodPWM stepless high-frequency soft unloading (built-in)MPPT functionBoost MPPT model ( automatic tracking or 5 segments curve tracking) Input current of MPPT channel12APV input parametersRated input current of applied PV550W/24V(standard)1100W/24V(Optional)1100W/48V(standard)2000W/48V(Optional)Rated input current of terminal15A(standard) 30A(optional)Charging voltage drop<0.2VPV protection methodsReverse connection protection (voice prompt)Unloading methodOpen circuit unloadingDischarge the output port parametersoutput 2 outputsCurrent of each output12AOutput protection methodsOver current protection (15A/30sec. 18A/0.4sec.), short-circuit protection (current > 150A)Output control methodslight control, time control, reverse output, PWM output (250HZ, only the 2nd output has it)OthersAuxiliary functionMonitor of air temperature inside controller, temperature of unloading parts and Wind turbines MPPT components, and also the monitor of control terminals installed on the inversion (with voice prompt)Display modeLiquid crystal (LCD) displayCommunication modeRS232(5V electrical level)/RS485 (standard) Short-range wireless (optional)Displayed parametersWind turbines input voltage/current/power/generated energy/rev/unloading currentPV input voltage/current/power/generated energyBattery voltage/charging current/power/total charging capacity/battery status informationoutput current/power/abnormal information of the 2nd output portPower consumption in standby mode(screen backlight closed)about 20ma /24V systemOperating mode 3M foil key operation (4 keys)Working temperature / humidity range (environment) -40~+80ºC/20~85%RH(non condensing)Protection grade IP41Controller size (L*W*H) 175mm*148mm *84mm Net weight 1.8KG